Access
Codes
Matrix SETU VFX uses 3-digit
short codes allowing the user
to enable/disable features, dial
emergency number, access the FXO
(PSTN Pass-Through) port or to
enter in the programming mode.
These short codes are known as
Access Code that the user dials
to access specific features.
Allowed
and Denied List
Allowed and Denied Lists are used
to restrict dialing of long-distance
and international numbers. A number
is blocked if its prefix matches
with any entry in the Denied Lists.
On the other hand, a number is
allowed to go through if it matches
with any entry in the Allowed
List. This provides flexibility
of allowing only specific numbers,
blocking all others on FXS ports.
SETU VFX offers flexibility
of defining 24 such lists containing
64 numbers in each list.
Automatic
Number Translation
Matrix SETU VFX modifies the
dialed number or part thereof
so that it matches with the numbering
plan that is understood by the
ITSP. For example, if a user has
dialed the number 223344 to call
www.abc.com, the SETU VFX adds
the appropriate access code "*777"
specified by the ITSP and dials
out the number “*777223344”
instead of 223344.
Blind
Call Transfer
Matrix SETU VFX allows the
user to transfer the call without
talking to the remote user to
whom the call is being transferred.
The SETU VFX also notifies
the user about the failure or
success of the transferred call.
Block
Black Listed Callers
Matrix SETU VFX allows blocking
of incoming calls on SIP accounts
from specific addresses, thus
shielding users from unwanted
junk calls.
Call
Detail Record (CDR)
Matrix SETU VFX stores up to
2000 calls made through the gateway
in its internal memory. Reports
can be generated using various
filters like Port, Number, Date,
Time and Duration.
Call
Forward
Matrix SETU VFX provides the
user flexibility to forward his
calls to a desired destination
number. The calls can be forwarded
in various conditions like When
Busy, When No Reply and Unconditionally.
Call
Hold
Matrix SETU VFX allows the
user to put a party on hold to
avoid transmission of speech packets
as long as the other end is kept
on hold.
Call
Progress Tones and Rings
Matrix SETU VFX supports user
programmable tones and rings to
match those of the region or country
standard where it is installed.
Calling
Party Control (CPC)
CPC is required to prevent hanging
of the FXS port when it is connected
to a device like answering machine,
voice mail system, PBX etc. When
a call is disconnected from the
other side of the Internet, the
SIP port is released. The SETU
VFX can propagate this call
release on the FXS port in the
form of Calling Party Control
(CPC) signal. The device senses
this signal and frees the FXS
port.
Call
Waiting
This feature notifies the VFX
user about another incoming call
in wait during an active call.
Class
of Service
This feature allows provision
of specific features to be used
by specific users only while restricting
others from using the same features.
CLIP
An FXS port can be programmed
for any of the three CLIP protocols
- DTMF, FSK ITU-T V.23 and FSK
Bellcore 212A. The Calling Party
Number detected by SETU VFX
is presented on the FXS port.
Compact
and Sturdy
Matrix SETU VFX is an integrated
gateway equipment. It can be installed
on a wall or any table surface.
Day Light
Saving Time (DST)
The Real Time Clock (RTC) of the
SETU VFX moves forward or backward
automatically in tune with the
Day Light Saving requirement of
the country where it is installed.
The options like Week-Day-Month
or Date-Month are provided to
move the clock forward and backward
automatically on the specified
day, date and time.
Emergency
Number Dialing
This feature allows the user to
dial the emergency number using
FXO (PSTN Pass-Through) port.
Four emergency numbers can be
stored in the SETU VFX.
Fax over
IP (FoIP)
The Matrix SETU VFX user can
send and receive Fax over SIP
account, when the FAX machine
is connected to the FXS port.
The SETU VFX supports FoIP
using T.38 Vocoder and Pass Through.
FXO (PSTN
Pass-Through)
Matrix SETU VFX FXO (PSTN Pass-Through)
port should be connected to the
PSTN or PBX so that the user can
make certain calls using this
line. The first FXS port can use
this port to dial emergency numbers,
when the Internet is not available
and during power failure.
Dial
Plan
Matrix SETU VFX provides a
list of frequently called numbers
or part numbers with preferred
SIP account for each entry. When
a user dials a number, SETU VFX
finds the matching number using
the “best-fit” logic.
It then uses the SIP account given
against this matching number to
make that call. This ensures lowest
cost for all the outgoing calls.
SETU VFX allows the creation
of 24 such lists and a maximum
of 64 Numbers can be stored in
each number list. Individual Number
List can be created for each FXS
port to be used as phone book.
Hotline
If a particular number is dialed
frequently, it can be programmed
as a hotline number. Whenever
a user reaches SETU VFX, it
waits for some time for the user
to dial a number. If the user
does not dial any number, VFX
dials out the hotline number automatically.
Incoming
Calls Routing
Call arriving from any SIP account
can be routed to any of the FXS
ports.
LED Indications
Ten dual colour LEDs are provided
to represent the functionality
of the gateway. Individual LEDs
are provided for FXS Ports, Power
and System to notify the user
about different events.
Quality of Service (QoS)
Matrix SETU VFX supports TOS
and DiffServe to facilitate improved
voice quality.
Least
Cost Routing (LCR)
The SETU VFX selects a port
that is offering the least cost
for an outgoing call. It supports
dialed number based LCR algorithm
to select the most cost-effective
route.
Remote
Programming
It is possible to change the configuration
of the SETU VFX from anywhere
in the world if it is assigned
a global IP address. The only
thing the system engineer needs
is access to the internet and
a password.
SIP Accounts
A maximum of 9 SIP accounts can
be programmed and each FXS user
can be assigned one of the SIP
accounts for outgoing calls. Dynamic
allocation of SIP account is also
possible using the Dial Plan.
These SIP accounts can be from
multiple service providers or
all from a single service provider.
STUN
This capability allows Matrix
SETU VFX to work behind asymmetrical
NAT.
Web Based
Programming
Matrix SETU VFX incorporates
built-in HTTP server and web pages
for configuration parameters.
This web based programming feature
helps the user to configure the
gateway from any part of the world
once it is connected with the
IP network.
