SETU VGFX

Fixed GSM/3G-VoIP-FXO-FXS Voice Gateway

Overview

SETU VGFX is a single-box gateway solution for any legacy system or an IP-PBX. It offers seamless connectivity between IP, GSM/3G and POTS (FXO and FXS) networks. Organizations can place calls using preferred networks to lower communication cost and avoid higher interconnection charges.

GSM/3G trunking not only saves on mobile call charges but also allows unique applications to be created. Organizations can have virtually free calling between office and field employees using the corporate CUG plans.

SETU VGFX easily fits into any existing data infrastructure and allows low-cost long distance calling through SIP trunking. Organization can connect multiple branch offices over the WAN internet for cost-effective internal calling.




Applications


GSM/3G and SIP Trunking for Legacy Phone Systems

GSM/3G and SIP Trunking for Legacy Phone Systems

  • Easy integration with existing telephony interfaces and devices
  • Make calls on GSM/3G and IP networks from existing telephony instruments
  • Automated call route selection based on least cost algorithms
  • Fixed-line alternate/back-up  for remote office sites and call-shops 


GSM/3G and PSTN Connectivity for an IP-PBX

  • Easy integration with existing telephony interfaces and devices
  • Automated call route selection based on least cost algorithm
  • Place calls over GSM networks from locations with limited fixed-line connectivity
  • Fallback connectivity on FXO or GSM/3G network in case IP network is down
GSM/3G and PSTN Connectivity for an IP-PBX


Network Multiple Sites over IP

Network Multiple Sites over IP

  • Route voice calls over existing data network
  • Easy integration with existing telephony interfaces and devices
  • Free inter-branch calls with direct IP calling
  • Centralized management and monitoring of resources


Key Features

  • Make calls from analog terminals over the cellular and IP networks
  • Quad-Band GSM network operation
  • Tri-Band 3G network operation
  • Open-Standard SIP
  • Multiple SIP proxy registrations
  • Direct number dialing on the cellular networks with automatic number translation
  • Time/number based call routing
  • Caller ID presentation on analog station
  • Fax over IP (T.38 and PSTN Pass-Through)
  • Restrict unwanted calls with list of denied numbers
  • CPC signaling to prevent port blockages and accurate billing
  • Emergency number dialing
  • Hotline extension setting
  • Single Antenna for 4 GSM/3G SIMs
  • Web-based remote administration


Specifications

Models:

SETU VGFX8422 8 VoIP Channels, 4 GSM SIM, 2 FXO and 2 FXS
SETU VGFX8422 3G 8 VoIP Channels, 4 3G SIM, 2 FXO and 2 FXS
SETU VGFX8404 8 VoIP Channels, 4 GSM SIM and 4 FXS
SETU VGFX8404 3G 8 VoIP Channels, 4 3G SIM and 4 FXS
SETU VGFX8440 8 VoIP Channels, 4 GSM SIM and 4 FXO
SETU VGFX8440 3G 8 VoIP Channels, 4 3G SIM and 4 FXO

Mobile Port:

Frequency Bands Quad-Band GSM850, EGSM900, DCS1800, PCS1900
Tri-Band WCDMA 850/1900/2100 MHz or Tri-Band WCDMA 900/1900/2100 MHz
Compliance ETSI GSM Phase2/2+
SIM Interface 1.8, 3V SIM Interface
Antenna 3.0dBi, 50W, SMA (Male) Connector, Omni Directional with cable of 3 meters length
2.5dBi, 50W, SMA (Male) Connector, Fixed Omni Directional Swivel Antenna

VoIP Port:

Protocol SIP v2
Physical Connector Ethernet (RJ45)
Voice Quality G.168 Echo Cancellation, Layer3 QoS and DiffServ, CNG
Voice Codecs G.711 (A-law, µ-Law), G.723, G.729AB, GSM-FR, GSM-EFR and iLBC Voice Codec
SIP Trunks 9

FXO Port:

Physical Connector RJ11
Dialing DTMF and Pulse (10/20PPS)
Loop Limit 1200W
CLI Presentation DTMF, FSK ITU-T V.23 and FSK Bellcore 202A CLI

FXS Port:

Physical Connector RJ11
Dialing DTMF and Pulse (10/20PPS)
CLI Presentation DTMF, FSK ITU-T V.23 and FSK Bellcore 202A CLI
Call Maturity Polarity Reversal

Power Supply:

Input External Power Adaptor
Input: 90-265VAC, 47-63Hz
Output: 12VDC@2A
Power Consumption 12W (Typical)

Mechanical:

Dimensions (WxHxD) 15.5 X 22.1 X 5.15cm (6.1”x8.7”x2.0”)
Unit Weight 1 Kg (2.2 lbs)
Shipping Weight 1.4  Kg (3.08 lbs)
Mounting Options Wall Mount and Table Top

Environmental:

Operating Temperature -10°C to +50°C (14°F to +122°F)
Storage Temperature -40°C to +85°C (-40°F to +185°F)
Operating Humidity 5-95% RH (Non-Condensing)
Storage Humidity 0-95% RH (Non-Condensing) at 40°C

Regulatory Compliances:

IEC 60950-1, RoHS, FCC Part15, CE

Resources

Brochure



Quick Enquiry

Please submit following details. We will soon contact you to meet your needs with suitable solutions!

Name:
Email:
Contact Number:
Company Name:
City:
Industry you belongs to:
Solution of Interest: